How to shave everyday?

How to Get a Close Shave Without Irritation

You like being smooth and stubble-free, but redness and razor burn can be a high price to pay for “bare-able” skin.

Luckily, there are easy ways to treat that irritation — and to avoid it altogether by thinking ahead and employing some smart strategies. Here, experts share their insider tips to help you avoid redness and irritation every time.

Assess the condition of your skin. Avoid shaving areas afflicted by red, irritated bumps from a previous session. “You’ll cut the tops off the bumps and irritate them even more,” says Jessica Wu, MD, assistant clinical professor of dermatology at the University of Southern California Medical School. Leaving them alone will help you avoid a cycle of pain, especially for tender areas such as the underarms.

Give it time. Give your skin and hair some time to soften in the shower with the help of heat and moisture. Ample lather from shaving cream will also help hydrate your skin and lubricate the area, which minimizes trauma from the razor, says Mona Gohara, MD, an assistant clinical professor of dermatology at Yale University.

Make as few passes as possible. You might often have been advised to shave in the direction of hair growth, but this doesn’t actually help you get a close shave. You can go against the direction of growth, but try to make as few passes with your razor as possible.

Treat any irritated skin. If you notice irritation anywhere, apply a gel or lotion that contains aloe vera or calendula, which can help calm the skin. You can also use an over-the-counter cortisone cream to treat redness and irritation. If conditions are particularly bad, you might find immediate relief by putting cool washcloth compresses over the area, says Dr. Wu.

Prevent ingrown hairs with benzoyl peroxide. If you’re prone to ingrown hairs, use a product that contains benzoyl peroxide, which can help skin stay clear. “It has antiseptic properties and prevents hair follicles from becoming inflamed,” says Doris Day, MD, a clinical assistant professor of dermatology at New York University Medical School.

Don’t pick at ingrown hairs or scabs from nicks and bumps. “People think ingrown hairs have to come out, but when you squeeze you’ll only traumatize the hair follicle,” Dr. Day says. Instead, apply a small dab of over-the-counter cortisone cream to the inflamed area every day for a couple of days — but not longer than two weeks, as cortisone creams will thin the skin over time, Dr. Gohara says. In time, your body will expel the ingrown hair naturally. If the skin remains irritated, or the cortisone doesn’t treat it, see a dermatologist.

Consider laser hair removal. If you’re the right candidate (i.e., you have dark-colored hair, light skin and no suntan), laser hair removal could be a great investment. Even people with darker skin tones who have been told that the procedure might produce dark spots should weigh the benefits and look for skilled providers. “You just have to make sure that the provider has performed laser hair removal on dark-skinned people before,” Dr. Gohara says. “If you’re in the right hands, they can properly remove the hair without discoloration.”

You might be able to pick up the basics of shaving from TV commercials and a little bit of advice from your father. But knowing how to prevent razor burn only comes from personal experience—or some in-depth research. As far as the research goes, we can help.

Nothing looks and feels worse than turning fiery red after shaving your face. You willingly and happily went for a baby-smooth finish, only to be punished for it. Not only that, but by the time the razor burn heals, new stubble will already be sprouting—so, really, what was the point?

We’re not knocking the act of shaving. In fact, we’re all for it….when it’s done correctly and safely. Razor burn is entirely preventable. More often than not, it is the result of a shaving regimen that is hasty or careless. Even guys with sensitive skin can avoid it.

There are specific steps you must follow to protect and nurture your skin, especially if you are susceptible to irritation, ingrown hairs, and razor burn. Here are those steps—that is, how to prevent razor burn—in their precise order.

1. Prepare the skin properly

First things first: You need to warm up your skin—literally—for that sharp razor. Take a hot shower, or wash your face thoroughly with warm water. If you skip this initial step, your skin is less resilient, and your stubble more stubborn. By having soft skin and hair, you lessen the likelihood of the blade dragging and tugging the skin, and improve the razor’s ability to cut the hairs cleanly and quickly.

After the warm water cleanse, you should apply a pre-shave oil or cream. This forms a thin, nourishing base layer over the skin, to shield it from the blade without compromising the closeness of the shave itself. It also further softens the hairs, so that you can mow without resistance.

Proraso pre-shave cream

Amazon $13 Buy Now

2. Turn up your razor hygiene (and maybe turn down the blade count)

Razor hygiene is essential in preventing burn. If you aren’t replacing your razor regularly, then it might be time to sign up for a razor replenishment program like Dollar Shave Club or Harry’s. They’ll top you up so that you never use a dull or dirty blade. You need to be shaving with a sharp, clean blade. But you don’t need to toss the cartridge after each use. You should get multiple uses out of one razor head.

The rule of thumb for razor replacement: Never use a razor more than 8 times. And never use it more than 3 weeks. Replace the blade at either of those intervals—whichever one comes first. At that point, it’s either too dull or has collected too much bacteria and dust, even if you’ve been storing it properly. (That is, stored upright in a cool, dry space after shaving. And with a plastic cover over top between shaves, after it’s dried.)

If you have sensitive skin, you might also consider using a razor with fewer blades, to minimize the number of sharp objects dragging over your skin. This is why lots of guys switch to a safety razor. Or, you could try a 3-blade razor, like Gillette’s Mach3.

Gillette Mach 3 razor

Amazon $6 Buy Now

Vikings Blade safety razor

Amazon $29 Buy Now

3. Consider using a badger brush

If you’re shaving hairs that are more than a few days old, you might be able to lift them up away from the skin by applying your shave cream with a badger brush. You simply wet the brush in warm water, poke a hole in the center with your finger, then fill it with cream, before applying it in circular motions against the grain on your face. This builds a creamy lather while also pulling the hairs up and priming them for a nice, gentle shave.

The Art of Shaving badger brush

Amazon $60 Buy Now

4. Loosen your grip, and shave against the grain

If you’ve done everything correct until this point—the moment you begin to shave—then you should trust the process. There’s no need to apply lots of pressure to the blade, as you’ll only shear off extra cells or trim some hairs slightly below the surface of the skin. Lighten your grip, and let the blade glide over top your pre-shave layer and the shave cream. You shouldn’t require multiple passes, either. Again, if you’ve done everything right, then everything should go smooth.

For a man that likes to get a clean & close shave, the razor must come close to your skin. In spite of having the razor so close, no one really wishes for a razor burn.

However, we don’t always get what we wish for, as redness and razor burns always come as the price for having a close shave.

Have you ever imagined a day when you get to shave without having a razor burn? If so, this article is here to make that imagination of yours a reality, as it contains the best tips to help you avoid the razor burns that could result from shaving.

How to Avoid Razor Burns and Get a Close Shave?

Make use of a single-blade safety razor; do not use a cartridge razor

If you have been wondering how to prevent razor burn and get a close shave, then you must have figured that you probably need the best grooming tools.

You would agree that a razor is an important tool. While modern multi-blade cartridge razors always seem like the most convenient option, they’re not the best for your skin.

When multiple blades are used on your skin, while the first blade pulls up the hair, the other blades go on to cut underneath it. Although the producers of these blades claim to make them for the purpose of getting a close shave, these blades are actually a little too close for comfort. Multi-blade razors tend to cut the hair beneath the skin, leading to ingrown hairs, as well as razor bumps.

On the brighter side, single-blade safety razors proffer a solution by giving a safe alternative that would hardly cause any razor burns. There are three simple steps to get a close shave and prevent razor burns.

  • Step 1: Use Pre-shave oil
  • Step 2: Shave with the grain
  • Step 3: Use an aftershave lotion

Step 1: Use a Pre-Shave Oil

Each time you noticed a pre-shave oil on the shelf of a store, you might have been wondering what exactly the benefits of these oils are. If you are looking to get a close, yet injury-free shave, then you should purchase oils for pre-shave the next time you go to the store. This is because these oils make the beard softer so that you can shave without any form of tugging at the hair. These oils also function to give a layer of lubrication (which is protective), between the sensitive skin of the face and the razor blade.

So, stop wondering how to get a close shave without razor burns and go get pre-shave oils. In essence, apart from having a great grooming kit, you need these oils.

The oils are usually made from a mix of natural oils (such as olive oil and castor oil). It does not only provide lubrication but also gives hydration to the skin.

Step 2: Shave with the Grain

Shaving with the grain makes your shaving seamless. However, when you shave against the grain, it is like pulling the way in a direction, out of its natural arrangement. Hence, shaving against the grain allows the razor to first go through pulling the hair across in another direction before cutting it out. This feels like doing a lot of shaving and also makes it seem like you are putting a lot of effort into shaving. However, you are only increasing your chances of having ingrown hairs and razor burns.

Remember to shave with the grain. If you are going to achieve this, then you need to check out the direction of hair growth by running your hand through your hair. After discovering this, shaving with the grain gets easier.

Step 3: Use an After-Shave Lotion

Following shaving, an after-shave lotion is no luxury, it is a must! It is the best gift you can give to your face after shaving. As opposed to the effect of alcohol-based after-shave products, the lotion forms are moisturized your skin greatly. This way, your skin does not dry out. A couple of after-shave lotions also have ingredients that help avoid cases of inflammation. This way, razor-related injuries, and razor burns are prevented. It gets even better if your after-shave lotion of choice contains aloe vera. This is because aloe vera has been proven to be skin-suiting, following shaving. Other great ingredients include tea tree oil and jojoba oil.


A close shave without a razor burn is very achievable, and the tips discussed in this article are proven. However, it doesn’t stop at that. Specific people react to things like a particular pattern of shaving. It is up to you to look out for what really works for you.

How To Shave Everyday Without Irritation

There are quite a number of men who shave everyday because their facial hairs re-grow at a faster rate or they have no choice due to nature of their work that they have to look clean daily.

It is indeed a toll not only to yourself but to your face as well. Shaving everyday can only mean that facial skin becomes tenderer each day and might lead to irritation thus making it difficult for you to shave. Fortunately, there are certain remedies that you can do so that you can shave everyday without irritating your face.

Common Tips You Should Not Forget

Indeed, one of the causes of irritation is when you forget some of the basic strategies when it comes to shaving every day. These are:

  • Stop momentarily when you feel that your skin hurts because when you ignore the pain, more problems will definitely ensue.
  • Always use very sharp razor blades, change the blade if it feels and looks dull already. When you force dull blade when shaving, it causes razor burns.
  • Do not rub the irritated area instead, rinse it with cool water.
  • Instead of alcohol based aftershave cologne and other solution, sooth your skin with mild astringent, or aloe vera, or even tea tree oil.

The Right Way To Shave Everyday

Shaving is more than applying lather and dragging sharp razor across your face. You need proper technique to avoid irritating facial skin. The first thing that you should is to wet a towel with hot water and wring it slightly and dab entire area of your face with the wet towel and allow your face to dry naturally to soften facial hairs.

Next step is to apply shaving cream with moisturizer around the bearded zone. Do not apply generous amount of shaving cream into your face as it will clog and dull the razor. The right way to shave is use one hand to smoothen facial surface and the other hand to hold the razor and shave. Finish with rinsing your face with cool water and avoid using aftershave instead use a conditioner.

There’s nothing like a good clean shave to start your day off right. A well-shaved face leaves a good impression with potential clients and lady friends. Unfortunately, legions of men are walking around right now with a nasty side effect of improper shaving: razor burn. We’ve all had it at one time or another- that horrible itchy feeling that pops up a few hours after you shave. Razor burn not only ruins a good shave, it just looks bad. But with the proper attack plan, razor burn and razor bumps can be prevented. Here’s yours:

What is Razor Burn?

Razor Burn: It Ain’t Pretty

Razor burn is an irritating rash that sometimes appears after shaving. In its most mild form, razor burn will be slightly itchy and create a noticeable red rash on your face and neck. In severe cases, razor burn can also produce “razor bumps.” Razor bumps are created by ingrown hairs. They look like pimples and they can itch like a mother. Ingrown hairs, and consequently razor bumps, are particularly problematic for African-American men because of their curlier beards.

Razor Bumps

How to Prevent Razor Burn

Soften the beard. A nice soft beard can be removed far more easily than one that feels like a brillo pad. Thus, the best time to shave is after you take a shower. The hot steam will soften up your beard, leaving it in primo condition for shaving. If you want to get your beard really soft, take some hair conditioner and rub it on your beard while you’re in the shower. Leave it on for the duration of the shower and rinse when you’ve finished bathing. Your beard will be as soft as a baby’s bottom.

Exfoliate. Exfoliating isn’t just for your girlfriend. Use a facial scrub or your wife’s poofy loofa thingy to remove dead skin cells and bring potential ingrown hairs out of hiding. I don’t know if it’s manly, but I’m a fan of St. Ive’s Apricot Scrub. It’s inexpensive and really makes your skin feel nice.

Use a badger brush. When you lather up your beard, use an old school badger brush. Using a brush to lather up helps get the shaving cream up under each whisker which results in better, smoother shaves.

Use a safety razor. Some people swear by the five blade razors that are out on the market today. If you can get a good clean shave with those, then keep using them. But if you feel like every shave leaves you with irritation and razor burn, consider shaving with a safety razor. For many men, the multiple blades of today’s modern razors irritate the skin more than needed. It’s overkill. Shaving with a safety razor will eliminate skin irritation and give your face a clean, healthy look because you’re just using one blade instead of several that chew up your face while cutting your whiskers.

Shave with the grain. In an attempt to get that smooth as a baby’s behind touch, many men shave against the grain. While shaving against the grain can get you that smooth feel in one deft swoop, you risk slicing up your face and causing razor burn. Also, shaving too close increases the chances for ingrown hairs and razor bumps. Shave with the grain instead. This will reduce the chances of irritation and razor burn. You won’t be able to remove your beard in one pass when shaving with the grain. That’s okay. Just lather up and make another pass with the razor. Making several passes with the grain is much better than making one pass against the grain.

Use light, short strokes. Applying too much pressure with the razor increases your chances for razor burn. The weight of the razor is sufficient to cut your beard. To keep yourself from applying too much pressure, use short strokes. With longer strokes, we tend to apply more pressure on the razor.

Use a sharp razor. Have you ever tried cutting a tomato with a dull knife blade (or watched an infomerical where they did)? Notice how instead of cutting, you end up tearing the tomato? Well, imagine the tomato being your face. Instead of cutting your whiskers cleanly, a dull blade creates a lot of drag and tears at your whiskers. This increases your chances of creating ingrown hairs and skin irritation. One of the benefits of using a safety razor is that you can change blades frequently and it won’t cost you an arm and a leg. Each blade is about $.25.

Clean the blade with alcohol. One of the main causes of razor burn and skin irritation from shaving is bacteria on your blade. Kill the bastards by wiping down your razor blade with some rubbing alcohol before you start shaving. Some companies sell fancy blade antiseptic for big bucks, but it’s just run of the mill alcohol plus some fragrance. Drugstore rubbing alcohol is all you need.
Clean the blade after every stroke. Every time you make a pass on your face, your blade is collecting whiskers and shaving cream. This goop gets in the way of the blade making a clean cut. Rinse your blade after each pass.

Rinse your face with cold water when done. The cold water helps close up your pores and reduces the probability of pesky whiskers forming ingrown hairs.

Apply a balm or moisturizer. You’ve just finished scraping a piece of sharp metal across your skin, so no matter how carefully you shave, your face is going to be a little unhappy. Aftershaves can feel refreshing, but for some men, they actually add to the irritation. If this is you, try applying a soothing balm or an aloe vera-based cortisone cream in order to reduce redness. You can find shaving balms or cortisone cream at your local drugstore.

Apply a razor bump cream. If you’re an African-American man or susceptible to ingrown hairs, there are a few products you can apply to prevent razor bumps. Bump Stopper and Tend Skin are two products you can find at your local drugstore. Both of these products help prevent ingrown hairs from forming.

Dry your blades and brush. After you’re done shaving, dry off your blade with a towel. This will help prevent the blade from dulling quickly, keeping it nice and sharp for your next shave. Also, be sure to use a holder to hang up your badger hair brush so it gets some air to dry out. A wet brush can grow bacteria that you’ll be slathering on your face the next time you shave.

Listen to our podcast on the secrets to a perfect shave:

Unfortunately, he’s right. The sensitive types among us will probably always have a few issues with their daily shave. But that doesn’t mean you have to dread the razor every morning, just that you have to take some extra steps to make sure ensure a clean, healthy shave. We consulted the pros for their best tips on a burn-free shave, plus some (relatively) quick fis in case of an utter emergency.

Phillip Picardi_ is the beauty and grooming editor at Lifestyle Mirror. _

1. Start with the Skin

In shaving guides, you rarely see any information about a man’s normal skin routine. Therein lies the problem. “You need to stay away from anything with alcohol,” says Diana Schmidtke, celebrity groomer for Clooney, Robert Pattinson, Liam Hemsworth, and more. “And be careful which toner you choose.”

Miles Elliot, master barber at F.S.C. Barber, also stresses the importance of skincare. “Moisturizing frequently will reduce the likelihood of ingrown hairs,” he says. Only moisturize in the morning, if at all? Do it day and night.

Astringent cleansing products or chemical eoliants can aggravate the skin, causing it to be red or dry before you shave. Plus, a lot of drugstore products contain drying preservatives. Upgrade to the Aesop Parsley Seed line ($35-$65) for daily gentle treatment and protection.

This is the GQ guide on stubble maintenance, packed with everything you need to know on how to grow perfect stubble. It’s not just about running a trimmer over your chin and cheeks every third day—there’s much more that goes into it if you’re taking it seriously. If you don’t take precautions, you can end up with dry skin and beard itch on the regular. So follow these steps and give your stubble the TLC it deserves.

1. Pick your weapon

This is the endless beard trimmer vs. electric shaver debate.

Since different guys grow their hair at different lengths, and since you might not be able to tend to your whiskers every single night, it’s often smart to arm yourself with both close-shave devices: an electric shaver and a beard trimmer. (You can check out GQ’s favorite ones at both of those links.) Or maybe you know which one you need more than the other. Still, it’s safe to have both ready to go.

The logic here goes several ways: You can shave with an electric shaver at night, if your stubble grows fast and full enough to cover the face by morning. (You lucky bastard.) It’s also good for cleaning up the neckline and cheek lines, which you’ll read about later in this article.

If your hair is less dense and you prefer to wear stubble a couple millimeters from the skin, you’ll want to have a trusty beard trimmer for the task. They’re adjustable in length—some offering as many as 20 length options—and a naked trimmer guard can snip the hair to a barely-noticeable half-millimeter above the skin. (If your whiskers grow fast and full, you can also opt for a bedtime “shave” with a naked trimmer, or with the guard head on its lowest setting.) If you don’t expect to trim every day, or if you only need to trim every few days, this device will be helpful in many more ways than an electric shaver.

2. Learn your optimal length

You probably already know how quickly your hair grows. With this in mind, it’s your responsibility to maintain the length you want (or the acceptable range of lengths, if you’re not trimming daily). The best way to do this is to first know exactly the length you prefer to have. A beard trimmer is your best device for this: You can adjust the guard to various lengths and work your way backwards, getting shorter and shorter until you love one length in particular. If you realize it too late—as in, you wish you had stopped on the previous half-millimeter increment—then you only need to wait a day (or two, or less) to get back there. If you don’t want to shave daily, it might be smart to shave half a millimeter less than your optimal length the night before you want to showcase it. Then you probably have a day or two of perfect stubble before you need to trim it again.

And that’s the game. Know your length. Let’s say it’s 2 millimeters. Trim it to 1.5 at night, and then trim it again when it gets to 2.5, whenever that may be.

3. Be creative

Here’s where things get more complex: Your optimal stubble might in fact be two different lengths, or perhaps more than that. A weighted, millimeter-longer mustache often nicely contrasts a slightly shorter beard. (Get some inspiration from a few well-styled celebrity beards, then apply the same art to your stubble.) Conversely, some guys look sharp with a slightly shorter mustache and a millimeter more around the chin. It’s a nice way to pull attention to or from certain features. And, since this isn’t a full 3-month’s growth we’re experimenting with, you can go ahead and try a new style each night that you trim. Just snip the beard to it’s usual spot, and leave the ‘stache slightly longer. If you don’t care for it, just bring the mustache down to the same length. A couple days later, try it again in reverse, this time with a weighted beard or even goatee.

4. Mind the borders

Regardless of creativity and your interest in “stubble styling”, you ab-so-lute-ly have to keep the cheek and neck lines clean. This is why you still need an electric razor, or a beard trimmer with a clean T-blade or naked-guard shave. (Or a regular razor will suffice, but of course.) Your whiskers don’t grow in a perfectly flattering row, and the easiest way to show people that your stubble is intentional is to have a sharp contrast between your two-day whiskers and your bare skin. This will also give your whiskers shape, the same way it helps define a beard.

  • If you’ve let several days pass before clearing the stubble, you’ll get better results if you trim before shaving.
  • Prep the skin before shaving by rinsing your face with warm water or taking a warm bath before you shave. This will help to soften your facial hair and open the pores.
  • Always use high-quality shaving cream, especially if you have sensitive skin. Keep an eye out for the shaving creams that are glycerine based, and avoid those that contain menthol, as they will close your pores and stiffen your beard.
  • If you have an especially tough beard or sensitive skin, try using a pre-shave oil to soften the beard and reduce razor drag that can cause excess friction and razor burn.
  • When applying shaving cream, apply the cream in a circular motion with a shaving brush. This will produce a much richer lather that will gently lift the hairs and exfoliate the skin.
  • The two biggest causes of ingrown hairs and razor burns are poor lubrication and the use of dull razor blades. Make sure you always use a quality shaving cream and a sharp blade.
  • Stretch the skin gently to make it taut, and gently glide the razor against the direction of hair growth.
  • Hold your shaver at a right angle to your skin and do not apply any pressure. The weight of the razor will provide all the pressure needed.
  • Rinse your blade often.
  • Close the pores of your skin after shaving, by rinsing your face with cool water. Gently pat the face dry with a soft towel. Avoid rubbing dry as this can irritate the skin just after shaving.
  • After shaving, moisturise the skin either with a gentle moisturiser or a post-shaving balm. Doing so will replace essential oils to skin that may have been stripped while shaving. Moisturiser will also calm the skin and reduce any irritation.
  • Avoid using aftershave that contains alcohol as this can unnecessarily dry out the skin and quicken the ageing process

How to Grow & Maintain the Perfect Stubble

These days, clean-shaven is no longer the only way to look well-groomed. Stubble may still have a rugged feel but instead of scruffy and sloppy, it’s now considered sophisticated and stylish. When done right, stubble can enhance your features, define your jawline, and create a mature and masculine appearance. On top of that, it can also make you appear more handsome and banish that terrible “baby-face” look. While stubble can be a great excuse to skip shaving every day and save you time during your morning routine, it does take work. Without the proper care and maintenance, your polished facial hair can quickly end up looking unkempt. So, if you want to be able to wear your stubble to the office with pride, it’s best to know how to achieve the perfect look.

What is Stubble?

Stubble is that somewhat ambiguous length of facial hair between clean-shaven and a short beard. Depending on how quickly your hair grows, stubble can be anything between a few days and a couple weeks of growth. Although stubble is similar to a short beard, its lesser length means that the hairs don’t come away from the skin as much. This means that you can create a distinguished and manly look with stubble without moving into the wilder territories of a beard.

Stubble vs Beard

Stubble, when done right, looks like the perfect facial hair growth. While the first day or two may simply appear like you forgot to shave, after the third day or so, it’ll begin to look deliberate and ruggedly stylish. Its short length also allows for a clean and more polished look than a beard. While beards can be styled and appear well-groomed, properly maintained stubble will always appear neater. Perfect for gents whose office won’t allow a full beard, stubble is a great alternative. It offers the same masculine appeal without the extra untamed aesthetics.

Will Stubble Suit Me?

Unfortunately, facial hair doesn’t suit every gent, so be aware before growing stubble that it may not turn out as planned. You’ll never know until you try, however, so don’t be afraid to give it a go. Just think, the worst that will happen is that you’ll have to shave it off. If you’re not prepared to maintain your stubble, don’t bother growing it because it’ll simply end up looking messy. If you often have bad reactions to regular shaving stubble could be your ideal option.

When growing stubble, be mindful of the overall appearance. If it’s coming in patchy and simply looks a bit bare, a clean-shaved look may be a better option. Also, once your initial stubble is grown, listen to comments from friends and colleagues. Chances are, if you’re getting a lot of compliments, you should keep the stubble. If people are still asking if you forgot to shave after a week or two, however, stubble may not be suitable for you.

How to Grow a Heavy Stubble

Every gent’s facial hair grows at a different rate and thickness, so ultimately your genetics will determine how thick your stubble will grow. That being said, things can diminish or increase your capabilities of growing heavy stubble. Stress, bad diet, and physical damage will all slow down and affect growth negatively. Having a good and healthy lifestyle, on the other hand, will always help you achieve the best growth possible, but there are a few more things you can do to help your stubble along. Taking supplements, such as biotin, zinc, vitamin B, and magnesium can help your hair to grow faster and healthier. Likewise, a boost in testosterone will also help you grow heavier stubble. As well as working out to boost testosterone you can also eat more red meat, spinach, nuts, avocados, olives, broccoli, and olive oil.

How to Trim and Maintain Stubble

Stubble may be designed to look effortless but don’t be fooled. You’ll need to put a little time into caring for your stubble to achieve the right look. To maintain the ideal look, you’ll need to groom, trim, and shape it regularly. You still want a natural and rugged appearance, however, so don’t overdo it in the grooming department. Create a routine for trimming depending on how quickly your stubble grows. Generally, grooming every 2-4 days will keep your stubble looking suitably stylish. The idea is to maintain a length that’s neither too short nor too long. You want to lightly trim and shape your stubble for a natural yet tidy appearance.

Before trimming, exfoliate your skin by washing your face with a washcloth and quality face wash or facial scrub. Then, apply shaving oil and leave for 30 seconds to soften your facial hair for trimming. When using the trimmer, be sure to have a light hand to maintain an organic appearance and avoid creating obvious straight edges or sharp lines. Trim whiskers to a uniform length before setting the trimmer slightly shorter to blend the edges. The aim is to create a natural-looking fade from stubble to bare skin. Clean shave the areas outside your stubble, such as cheeks and your lower neck. Doing so will create a cleaner look and eradicate stray hairs. Afterwards, apply some aftershave to calm the skin and soothe irritation.

How to Style Your Stubble

Unlike a beard, stubble doesn’t need much styling. Not only does its short length mean lower maintenance, but it also means that a natural appearance is best. While you’ll, of course, want to keep your stubble trimmed and clean up stray hairs around your cheeks and below the Adam’s apple, it’s best to otherwise leave your shape as it organically grows. When it comes to cleaning and grooming, stubble doesn’t need to be shampooed. Simply cleaning your face regularly with facial cleanser will do the trick. Also, regularly softening skin and stubble with some moisturiser and beard oil will make your stubble look conditioned and polished while helping to keep itchiness and dry skin at bay. Try to avoid moisturisers containing alcohol, however, as these can actually dry out your skin. Also, keep an eye out for specific stubble and scruff softeners to create soft and touchable facial hair.

Best Stubble Trimmers

Before growing stubble, you need to be armed with an electric trimmer with guard attachments. A quality trimmer will make it easier to maintain the perfect stubble length and keep hairs even, so you appear sharp not scruffy. Not only will these top trimmers help you keep your facial hair in check and stop it from turning into a beard, but they’ll also allow you full control to ensure it doesn’t end up too short either.


How to Get the Perfect Stubble

  • To find your perfect stubble length, start by growing a short beard and then slowly shorten the length of your facial hair until you reach your desired look.
  • Use a good quality electric trimmer with adjustable lengths to easily ensure your stubble is the perfect length.
  • Regularly trim your stubble to maintain it.
  • Be sure to use a shorter length on your trimmer when trimming the edges of your stubble to create a natural fade to bare skin.
  • Use facial cleanser daily and beard oil/stubble softener regularly for soft and itch-free facial hair.


Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Thank you for subscribing.

Something went wrong.

We respect your privacy and take protecting it seriously

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *